Universal Isolation Terminal
Inline Terminal
Reliable, watertight cable grounding for harsh environments
The Universal Isolation Terminal (UIT) delivers an insulated, watertight connection to the external grounding lug on a wide range of splice enclosures. Engineered for cable locating in wet or flooded conditions, the UIT helps prevent signal shorting caused by moisture or debris in manholes and vaults—ensuring accurate cable location when it matters most. UITs are available in multiple sizes and configurations to suit various enclosure types and site conditions.
Quick Disconnect
The Quick Disconnect was designed to reduce the amount of #6 copperwire required for properly locating each fiber optic cable spliced in a vault or manhole. Traditionally, a continuous run of #6 copper locate wire was needed from the locate terminal post to the ground locating lug on the splice enclosure for each cable.
By using Lite Industries’Quick Disconnect, users can significantly reduce the length of #6 copper wire needed. Instead of running the wire the full length of each
fiber cable from the splice enclosure to the locate terminal post, only a short length is needed—from the locate terminal post into the vault or manhole—just enough to allow the splice enclosure to be lifted and disconnected.Once the wire is disconnected, the splice enclosure and fiber cable can be freely moved to a work area, such as a splicing trailer or van, without requiring 60 or more feet of #6 copper wire for each fiber cable. This results in substantial material savings at every splice point.
Kit Descriptions:
Components:
